Reid sent me these photos of his steel cross bike.
This just doesn't seem right, but I did indeed have to pay to have the downtube replaced.
How bizarre is that?
Photos of broken carbon fiber bicycle components.
This just doesn't seem right, but I did indeed have to pay to have the downtube replaced.
5 comments:
That's the wrong way to do a DT gusset, and a good example why!
The gusset wasn't the cause of the problem; the frontal impact was.
If that was a pure tube failure i.e., materials or construction, you would only see a crack in the paint on the underside of the downtube.
Instead, you see cracked paint on the top side of the downtube, which indicates a tube flex from a severe frontal impact.
In this case I can fully agree with having the owner pay for the repair.
http://www.flickr.com/photos/kym_p/2596815812/ another independent fabrications bike snapped...
Good information, thank u and please visit back my article~!
Cara Mengobati Spermatokel Secara Alami, Obat Sindrom Ovarium Polikistik Tradisional, Cara Mengatasi Nyeri Dada Sebelah Kiri Seperti Ditusuk Jarum, Cara Mengatasi Nyeri Dada Sebelah Kiri Seperti Ditusuk Jarum
Aluminum tends to be affable to dirt, insects, mildew, mold, spider webs, etc. https://metalprofy.com/aluminum/best-aluminum-wallets/ Also due to the fact that aluminum retains both heat and also cold; if the paint is applied in temperatures that are not within the parameters of their product then the chances of the paint peeling will substantially increase.
Post a Comment